Browse our large and growing catalog of applications to run in your Unraid server.
Compressarr is an application to take a filtered set of media from Radarr or (eventually) Sonarr and process it with customisable FFmpeg presets. It will even attempt to find the best settings for each video. The default version is the Alpine version supporting limited Intel hardware support. For Nvidia Cuda encoding use the Nvidia (tag) version which is 1.4GB using the Ubuntu Core.
This Docker will download and install SteamCMD. It will also install Conan Exiles and run it. Servername: 'Docker ConanExiles' Password: 'Docker' rconPassword: 'adminDocker' ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!
A simple self-contained Rust-based Matrix server. Fully configurable with Environment Variables! (Beta) Check Support Thread for NGINX conf. Conduit is Beta, meaning you can join and participate in most Matrix rooms, but not all features are supported and you might run into bugs from time to time. Conduit is a lightweight open-source server implementation of the Matrix Specification with a focus on easy setup and low system requirements. That means you can make your own Conduit setup in just a few minutes. Conduit keeps things simple, it's a single binary with an embedded database and can be much faster than other server implementations in some cases.
CA Config Editor is a simple file editor for advanced users that will allow you to edit within your browser any of unRaid's configuration files (or any file on your server - useful for easily editing application's appdata config files without utilizing the command prompt)
Keep your Unraid configuration files synced with Mega.nz /boot/config/ volume is by default mounted as read-only to avoid data loss. PLEASE USE WITH CAUTION!!
Official Confluence-Server Docker Image
Conreq, a Content Requesting platform. More configuration options available on Github
Puts Docker Containers to sleep and wakes them back up when they're needed. Written in Node.js, this application acts as a HTTP reverse proxy and stops Docker containers which haven't been accessed recently and starts them again when a new request comes in. ContainerNursery also makes sure there are no more active WebSocket connections before stopping the container. To improve the user experience a loading page is presented, which automatically reloads when the containers webserver is ready.
controlrd is a companion plugin for the ControlR app.
Convos is the simplest way to use IRC and it is always online
CookieCloud is a small tool that synchronizes cookies with a self-hosted server. It can synchronize browser cookies and local storage to mobile devices and the cloud. It supports end-to-end encryption and can set synchronization intervals.
This package contains the Coral Accelerator Module Drivers and installs them to utilize them in your Docker containers. Only necessary for PCI based Coral TPUs!
Docker file for the new Core Keeper dedicated server running from SteamCMD. (No account etc needed) If your files do not load please check https://github.com/escapingnetwork/core-keeper-dedicated/issues/5
CoreFreq is a CPU low level monitoring software designed for x86_64-Processors. You can show Package and Core temps, Hot sensor, Vcore, RAM,... You can also toggle SpeedStep, Clock modulation, Turbo boost, C-States demotion, C1E,... It has also a built in stress test and much, much more. Visit the plugin page after installing and follow the instructions. Open up a unRAID Terminal and type in 'corefreq-cli' (without quotes), hit "F2" or "SPACE" to open up the menu inside CoreFreq. Please note that not every combination of CPU and motherboard is supported! Intel Systems: It is recommended that you append 'nmi_watchdog=0' (without qutoes) for better accuracy to your syslinux configuration (this is only recommended if you are using it directly on Unraid with a physical monitor and keyboard attached, if are using it over SSH it's not necessary because of the added network delay). You can get more details here: https://github.com/cyring/CoreFreq ATTENTION: If you experience any rendom crashes of Unraid or a crash when installing the plugin please make a short post in the support thread and also put you Diagnostics (Tools -> Diagnostics -> Download -> drop the downloaded zip file in the text box) in the post. WARNING: KEEP IN MIND, FREQUENCIES/CORE RATIOS ARE APPLIED IN REAL TIME, PLEASE ONLY CHANGE THE VALUES IF YOU KNOW WHAT YOU ARE DOING!!!
This Docker will download and install SteamCMD. It will also install CoreKeeper and run it. GameID: Your GameID will be displayed in the log after the server successfully started. Port Forwarding: You don't have to forward any ports for this game because it uses the Steam Network and the GameID establish the connection. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!
A plugin that reads the statistics from Corsair PSU's with a USB port and displays them in the dashboard.
A plugin that reads the statistics from supported Corsair PSUs with a USB port and displays them in the dashboard.
Coturn TURN Server is a VoIP media traffic NAT traversal server and gateway. It can be used as a general-purpose network traffic TURN server and gateway, too.
CouchDB offical docker image Apache CouchDB has a document-oriented NoSQL database architecture and is Open Source.
CouchDB docker image for v2.x Apache CouchDB has a document-oriented NoSQL database architecture and is Open Source.
Couchpotato(https://couchpota.to/) is an automatic NZB and torrent downloader. You can keep a movies I want list and it will search for NZBs/torrents of these movies every X hours. Once a movie is found, it will send it to SABnzbd or download the torrent to a specified directory.
This Docker will download and install CounterStrike 2D. CounterStrike 2D is a free to play top down shooter (you can get it on Steam or at https://www.cs2d.com/)
This Docker will download and install SteamCMD. It will also install Craftopia and run it. Servername: 'Craftopia Docker' Password: '54321' ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!
Crafty 4 is the next iteration of our Minecraft Server Wrapper / Controller / Launcher. Boasting a clean new look, rebuilt from the ground up. Crafty 4 brings a whole host of new features such as Bedrock support. With SteamCMD support on the way Default login Credentrails are stored in your Crafty Configuration location in the file default-creds.txt Crafty 4 is the successor of Crafty Controller. For official support join the Discord server https://discord.gg/9VJPhCE For migration from 3.x please refer to the documentation: https://wiki.craftycontrol.com/en/4/
CrashPlan provides peace of mind through secure, scalable, and straightforward endpoint data backup. We help organizations recover from any worst-case scenario, whether it is a disaster, simple human error, a stolen laptop, ransomware or an as-of-yet undiscovered calamity. The GUI of the application is accessed through a modern web browser (no installation or configuration needed on the client side) or via any VNC client. Also, being based on Alpine Linux, size of this container is very small. For a complete documentation of this container, see https://github.com/jlesage/docker-crashplan-enterprise#readme Warning: Make sure to read the Taking Over Existing Backup section of the documentation if you are installing this container to replace another CrashPlan installation (from Windows, Linux, Mac or even another Docker container).
CrashPlan provides peace of mind through secure, scalable, and straightforward endpoint data backup. We help organizations recover from any worst-case scenario, whether it is a disaster, simple human error, a stolen laptop, ransomware or an as-of-yet undiscovered calamity. The GUI of the application is accessed through a modern web browser (no installation or configuration needed on the client side) or via any VNC client. Also, being based on Alpine Linux, size of this container is very small. This Docker container can be used with all CrashPlan products: Essential, Professional, Enterprise, MSPs and Small Business (no longer sold). For a complete documentation of this container, see https://github.com/jlesage/docker-crashplan-pro#readme Warning: Make sure to read the Taking Over Existing Backup section of the documentation if you are installing this container to replace another CrashPlan installation (from Windows, Linux, Mac or even another Docker container).
Docker Container for Create Above & Beyond Minecraft Modpack The docker on first run will download the same version as tagged of Create Above & Beyond and install it. This can take a while as the Forge installer can take a bit to complete. You can watch the logs and it will eventually finish. After the first run it will simply start the server.
Create Re-Flavored-6.44b Modded Minecraft ServerCreate Re-Flavored-6.44bA continuation of and stability improvement on the Create Flavored modpack with a lot of vanilla++ content with a focus on Create Contraptions.Version tags available: - 6.44b - 6.44 - 6.43 - 6.42b - 6.42 - 6.41b - 6.41 - 6.40 - 6.39 - 6.38 - 6.37 - 6.36 - 6.35 - 6.34 - 6.33 - 6.32Setup:You must accept the EULA by setting the EULA variable to true or the install will fail.Optional:You can setup a comma separated list of players who will have admin privileges in game by setting OPS
Above and Beyond v1.3 Modded Minecraft ServerAbove and Beyond v1.3The official Challenge-pack with Create. New inventions awaitVersion tags available: - 1.3 - 1.2Setup:You must accept the EULA by setting the EULA variable to true or the install will fail.Optional:You can setup a comma separated list of players who will have admin privileges in game by setting OPS
Create Flavored 5.10 Modded Minecraft ServerCreate Flavored 5.10 Neat and simple mod-pack focused on Create, flavored with quality mods that enhance creativity and aesthetics.Version tags available: - 5.10 - 5.9 - 5.8 - 5.7 - 5.6 - 5.5Setup:You must accept the EULA by setting the EULA variable to true or the install will fail.Optional:You can setup a comma separated list of players who will have admin privileges in game by setting OPS