Community Apps

This plugin adds RCON to your unRAID server and enables your to connecto to various servers who are following the RCON protocol standard. Simply issue 'rcon -h' from an unRAID Terminal and you get an overview on how to connect. A basic connection command will look like this: 'rcon -a RCONIP:RCONPORT -p PASSWORD' to end the connection press CTRL + C. ATTENTION: The RCON protocol transmits everything un-encrypted (including your password!). Therefore it is strongly recommended to not connect to RCON over the internet rather it is recommended to use a VPN or SSH if you want to connect to a foreign server over the internet. Source: https://github.com/n0la/rcon

This plugin adds a per share .Recycle.Bin folder to hold samba deleted files until you empty the trash either manually or remove aged files on a schedule. Shares that are excluded will not have the recycle bin enabled. A .Recycle.Bin folder is created in each share the first time a file is deleted in the share that you can access by browsing to //Tower/Share/.Recycle.Bin. You can restore deleted files from the //Tower/Share/.Recycle.Bin. The User access to the .Recycle.Bin folder is the same as the User share access. If you remove the plugin all deleted files will be kept in the share .Recycle.Bin folders. You will have to empty the trash before you remove the plugin if you do not want to use it.

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 2.5G Gigabit Ethernet > PCI Express RTL8125 / RTL8125B(S)(G) Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 5G Gigabit Ethernet > PCI Express RTL8126 Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). ATTENTION: To utilize 2.5Gbit/s speeds you have to add this line at the bottom to your 'go' file: 'ethtool -s eth0 autoneg on advertise 0x80000000002f' (without quotes and modify eth0 to the corresponding adapter in your system)! To utilize 5Gbit/s speeds you have to add this line at the bottom to your 'go' file: 'ethtool -s eth0 autoneg on advertise 0x180000000002f' The following Chipsets are supported by this driver: Network Interface Controllers > 5G Gigabit Ethernet > USB 3.0 RTL8157 Network Interface Controllers > 2.5G Gigabit Ethernet > USB 3.0 RTL8156 / RTL8156B Network Interface Controllers > 10/100/1000M Gigabit Ethernet > USB 3.0 RTL8153 / RTL8153B / RTL8153C / RTL8153D / RTL8153E Network Interface Controllers > 10/100/1000M Gigabit Ethernet > USB 2.0 RTL8154 / RTL8154B Network Interface Controllers > 10/100M Fast Ethernet > USB 2.0 RTL8152B Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 10/100/1000M Gigabit Ethernet > PCI Express RTL8111B/RTL8111C/RTL8111D/RTL8111E/RTL8111F/RTL8111G(S)/RTL8111H(S)//RTL8118(A)(S)/RTL8119i/RTL8111L/RTL8111K RTL8168B/RTL8168E/RTL8168H RTL8111DP/RTL8111EP/RTL8111FP RTL8411/RTL8411B Source: https://github.com/jinlife/unraid-r8125-r8152-driver

Sanoid is a policy-driven snapshot management tool for ZFS filesystems. When combined with the Linux KVM hypervisor, you can use it to make your systems functionally immortal.

Spin down idle SAS drives the same way SATA drives are spun down. If you have SAS spinning drives in your array, you may have noticed that Unraid, while asserting that they have been spun down, does not in fact spin them down (true at least up until version 6.8.3). This plugin attempts to ensure that SAS drives spin down and up in sync with Unraid schedule (i.e. same as SATA drives).

A plugin for advanced users installing SnapRAID onto UNRAID systems, now with support for multiple arrays.

Provides GUI for BTRFS Snapshots.

Use this plugin to change primary SSH configuration settings and enable Public Key authentication on a per user basis. It also gives the ability to stop/start and enable/disable the service.

This Plugin will install the Sundtek DVB Drivers to Unraid. Please visit the Plugin page after installing the plugin to configure your TVHeadend instance for use with this plugin.

This plugin enables creation/starting/stopping/changing of a Swap File on your unRAID server. The plugin allows placing swapfiles on a BTRFS formatted drive.

Taglib is a simple custom label manager

Tailscale is a VPN service that makes the devices and applications you own accessible anywhere in the world, securely and effortlessly. The service handles complex network configuration on your behalf so that you don't have to. Network connections between devices pierce through firewalls and routers as if they weren't there, allowing for direct connections without the need to manually configure port forwarding. After installing, open the console and use the tailscale CLI to configure: https://tailscale.com/cli Additional documentation is available at https://github.com/dkaser/unraid-tailscale/wiki

Experience the latest updates to the Tailscale plugin. With this version, you're at the forefront, gaining early access to the newest updates. After an initial release period, these updates are rolled out to the standard plugin, ensuring everyone benefits from the improvements. Tailscale is a VPN service that makes the devices and applications you own accessible anywhere in the world, securely and effortlessly. The service handles complex network configuration on your behalf so that you don't have to. Network connections between devices pierce through firewalls and routers as if they weren't there, allowing for direct connections without the need to manually configure port forwarding.

Reads Tasmota power devices

Theme Engine lets you re-style the unRAID webGui. Instead of creating a whole new theme, it adjusts settings that override the theme you are already using. You can adjust as few or as many settings as you like. Mixing and matching the base themes with Theme Engine settings creates endless possibilities. Import one of the included styles, or remix and export your own.

Tips and Tweaks gives you tips on issues in certain versions of Unraid and lets you make some adjustments to Ethernet NIC(s), disk cache settings, and CPU scaling governors that can potentially help with performance and latency issues.

How did that terminal command work again? TLDR presents the most common use cases for a command right inside your terminal, so you spend less time researching command arguments and more time actually getting things done.

This package contains the UGREEN LED Driver which will allow you to get your LEDs to work on your UGREEN NAS (please note that not all models are supported). The plugin is based on: https://github.com/miskcoo/ugreen_dx4600_leds_controller

This Plugin adds uinput to unRAID.

Unassigned Devices is used to mount and share non-array disks, remote SMB or NFS shares, and iso files.

Enables support in the Unassigned Devices Plugin for HFS+, exFAT, and apfs disk formats, and to enable destructive mode.

Unassigned Devices Preclear is used to exercise and clear disks and prepare them for adding to the array.

unbalanced transfers files/folders between disks in your array.

Allows unRaid's GUI to utilize the full browser window width instead of being limited to a maximum of 1920 pixel across

Unraid Connect is your one-stop shop for server management, monitoring, and maintenance. Enjoy the convenience and connectivity of the cloud and take your Unraid experience to the next level with Connect.

This plugin allows you to replicate your applications (Docker/LXC containers and chosen directories) from your Main machine to a second, unRAID based, Backup machine. With the inclusion of keepalived you can also create a virtual IP for your Main and Backup machine where the backup machine can automatically run the replicated containers. For more information visit the Support Thread on the forums. ATTENTION: This is a experimental release and it is recommended to use this tool with caution (make sure that you create a backup from your containers and data that is synced). If you encounter a bug please report it in the support thread.

Gives visibility into the UPnP activity on your network